Reed's
Small Engine
Sales & Service
Small Engine
Sales & Service
We buy used lawn & garden equipment, refurbish it, and re-sale it to the customer at a fraction of the cost of dealers. When you buy a piece of equipment from Reed's you can be assured it's ready for operation & everything that has been done to it has been disclosed.
Here is a rundown of what goes into our equipment before it's listed for sale:
Here is a rundown of what goes into our equipment before it's listed for sale:
PUSH MOWER
* Engine is fully inspected, compression test, leak down test, carbon cleaned from head & valves if necessary & new head gasket if head is removed
* Fuel tank cleaned, fuel line & fuel filter cleaned, replaced if necessary
* Starter recoil & rope inspected, all moving parts lubricated if applicable & replaced if necessary
* Carburetor disassembled and cleaned, parts replaced if necessary
* Throttle linkage & cable inspected, lubricated, replaced if necessary
* Oil changed & filled with recommended viscosity
* Air filter inspected, cleaned, & replaced if necessary
* All safety cut-off switches checked to be in proper working order
* Deck height levers inspected & adjusted
* Under deck cleaned & coated with anti-rust spray
* Blade checked for wear, stress cracks, sharpened, and replaced if necessary
* Engine is fully inspected, compression test, leak down test, carbon cleaned from head & valves if necessary & new head gasket if head is removed
* Fuel tank cleaned, fuel line & fuel filter cleaned, replaced if necessary
* Starter recoil & rope inspected, all moving parts lubricated if applicable & replaced if necessary
* Carburetor disassembled and cleaned, parts replaced if necessary
* Throttle linkage & cable inspected, lubricated, replaced if necessary
* Oil changed & filled with recommended viscosity
* Air filter inspected, cleaned, & replaced if necessary
* All safety cut-off switches checked to be in proper working order
* Deck height levers inspected & adjusted
* Under deck cleaned & coated with anti-rust spray
* Blade checked for wear, stress cracks, sharpened, and replaced if necessary
SELF-PROPELLED MOWER
SAME AS ABOVE PLUS:
* Gearbox inspected for proper operation, disassembled & parts replaced if necessary
* Belt checked for proper tension & wear, replaced if necessary
SAME AS ABOVE PLUS:
* Gearbox inspected for proper operation, disassembled & parts replaced if necessary
* Belt checked for proper tension & wear, replaced if necessary
RIDING MOWER
SAME AS ABOVE PLUS:
* Oil filter changed if applicable
* All belts inspected and replaced if necessary
* Deck spindles & bearings checked replaced if necessary
* All applicable parts are lubricated & greased, wheel bearings are checked, greased, & replaced if necessary.
* Tires & pressure inspected
* All steering linkage inspected for sloppy movement and adjusted or replaced.
* Charging system inspected. Battery checked, charged, replaced if necessary
SAME AS ABOVE PLUS:
* Oil filter changed if applicable
* All belts inspected and replaced if necessary
* Deck spindles & bearings checked replaced if necessary
* All applicable parts are lubricated & greased, wheel bearings are checked, greased, & replaced if necessary.
* Tires & pressure inspected
* All steering linkage inspected for sloppy movement and adjusted or replaced.
* Charging system inspected. Battery checked, charged, replaced if necessary
TILLERS
* Same engine inspection as listed above and all parts replaced if necessary
* Gearbox checked for proper operation & lubricated. Disassembled & parts replaced if necessary
* Tines inspected & sharpened
* All linkage & belts inspected & replaced if necessary
* Same engine inspection as listed above and all parts replaced if necessary
* Gearbox checked for proper operation & lubricated. Disassembled & parts replaced if necessary
* Tines inspected & sharpened
* All linkage & belts inspected & replaced if necessary
ALL 2-CYCLE ENGINES WEEDEATERS, BLOWERS, HEDGE TRIMMERS
* Compression checked, fuel tank cleaned, new fuel lines, carburetor disassembled all diaphragms, needle & seat, check valves cleaned & replaced if necessary (usually is the main problem)
* Starter recoil assembly inspected, replaced if necessary
* Air filter cleaned, replaced if necessary
* Gearhead on weedeaters are inspected and filled with proper lubricant
* Clutches inspected for wear, replaced if necessary on weedeaters, blowers, trimmers, etc...
* Weedeater cutting heads are filled with proper cutting line
* Compression checked, fuel tank cleaned, new fuel lines, carburetor disassembled all diaphragms, needle & seat, check valves cleaned & replaced if necessary (usually is the main problem)
* Starter recoil assembly inspected, replaced if necessary
* Air filter cleaned, replaced if necessary
* Gearhead on weedeaters are inspected and filled with proper lubricant
* Clutches inspected for wear, replaced if necessary on weedeaters, blowers, trimmers, etc...
* Weedeater cutting heads are filled with proper cutting line
All equipment is tested before leaving shop. They are also thoroughly cleaned to look as good cosmetically as they are mechanically. Before you buy a used piece of equipment give us a call first. If you don't see what you want listed ask because I may have one in the shop almost ready.
(423) 361-0916
reed.lawnandgarden.sales@gmail.com
811 Hwy 91 Shady Valley, TN
WE USE ONLY 100% GASOLINE
NO ETHANOL!